Thursday, January 7, 2010

What weight of engine oil does a 2005 SUZUKI VINSON atv take?

I am thinking it takes 10w 40 oil but i could be wrong that's why i am asking =) Also what type of oil filter does this bike take and link to a site with them if possible. Thanks.What weight of engine oil does a 2005 SUZUKI VINSON atv take?
check the owner's manual. That's why they have these things.What weight of engine oil does a 2005 SUZUKI VINSON atv take?
i would run 20:50 castrol motorcycle oil.


your local suzuki dealer will have the oil


filter you need.
i would run 30 wt in it thats what i run all of my three wheelers and 4 wheeler on....

Should I change the weight of oil I use at 100K miles?

I drive a 2000 Ford Ranger with the 4.0L pushrod engine. It currently has 110,000 miles on it. The owners manual states that 5W30 oil should be used. The reason the auto makers are switching to thinner oils like 5W30, 5W20, etc is because the engine tolerances are much tighter on newer vehicles. My truck still runs great, but engines with 110,000 miles are generally starting to get a little worn. Should I switch to 10W30 or even 10W40 to get the maximum lubrication on my older engine? Or is 5W30 still thick enough?Should I change the weight of oil I use at 100K miles?
use 10w30Should I change the weight of oil I use at 100K miles?
Why don't you ask people who work with these things everyday? They can tell you in a minute what type to use. Ask where you go to buy the oil.
Castrol do an oil specifically for engines with over 75,000 miles on the clock.
Slick 50 saved the engine in my Suburban ! I went for an oil change, and somehow, no oil was replaced in my engine. It was the only time I ever tried Slick 50, and it worked ! (I was told that the oil comes in barrels, and when they're empty, it's possible that the guys in back ';forgot to replace them with full barrels.'; Try SLICK 50 !!! Thank God, they at least got THAT in my engine ! )
The ONLY reason manufacturers recommend 5W30 is because they are required to; due to the fact that they run the light oil in the engine for the EPA mileage test.


Run Shell Rotella-T, 15W40 unless you're in a really cold climate. It has better lubricity than synthetics. Hot Rod magazine did a multi-page article about oils, particularly as they relate to camshaft wear, a few months back. Basically car oil is getting worse, due to emission requirements on new cars, diesel oil is still carrying the max amount of what provides lubrication, which is what all, especially used %26amp; older, cars need.
use what the manufacture says to use 5w30.. At 200K might change to 10w30 but that all depands how it sounds when it is running...
that's not to many miles. as long as the engine has not been abused the tolerances are still tight. i would continue to use the same oil you have been. I have a 92 ranger with 4.0 and over 250,000 miles on it. good luck
10W30
10w40 should be fine. A littler thicker as your motor is probably wearing down and having leaks you probably can't see. It helps against burning oil due to leaks and ring issues.
10w40 should be fine. A littler thicker as your motor is probably wearing down and having leaks you probably can't see. It helps against burning oil due to leaks and ring issues.
the 5w indicates the oil's viscosity recommendation for cold temperatures.Changing to a 10w 30 will make no difference unless you live in an arctic climate.If you are using a bit more oil between changes,you could benefit from using a heaver grade like 10w40. See the link for all your questions regarding engine oils.


http://www.carbibles.com/engineoil_bible鈥?/a>
I would use the same weight, but add a product called 'Lucas' to your oil. I have been using it for years on high-mileage vehicles, and it makes a huge difference.





They make an additive for your transmission fluid as well that I highly reccomend.
  • theatre tickets
  • What is the approximate weight of oil in a container 3 feet high and 9 inches in diameter?

    What is the approximate weight of oil in a container 3 feet high and 9 inches in diameter? (Oil weighs approximately 55 pounds per cubic foot.)





    45 pounds.


    82 pounds.


    53 pounds.


    73 pounds.What is the approximate weight of oil in a container 3 feet high and 9 inches in diameter?
    Area of bottom of container = 蟺r虏


    Converting this to square feet, area will be:


    A = 蟺( (9/2) / 12)虏 = 0.4418 square feet





    Volume is area x height


    V = (0.4418 sq ft)(3 ft) = 1.325 cubic feet





    Weight = volume * density


    W = (1.325 cu ft)( 55 lbs / cu ft) = 72.9 lbs





    Your answer will thus be


    73 poundsWhat is the approximate weight of oil in a container 3 feet high and 9 inches in diameter?
    73 pounds, assuming the container is cylindrical from the reference to its diameter.





    The diameter is 9 inches or .75 foot. Halve it (to get the radius), square that and multiply by PI, to get the area of the base in square feet. Multiply that by 3 to get cubic feet, then by 55 pounds to get the weight of the oil.



    So you need to calculate the volume inside the oil container.


    The formula is Volume is


    V = (pi) h r^2


    you have d = 9 inches so first convert it to feet


    d = 9 in * (1 ft/12 in) = (9/12) ft = (3/4) ft


    r = d/2 = (3/4)/2 ft = (3/8) ft


    V = (pi) (3 ft) (3/8 ft)^2


    V =(27(pi)/64) ft^3


    Weight of the oil = V * 55 lb/ft^3


    W = (27(pi) ft^3)/64 *55 lb/ft^3


    W = ~ 72.85 lb



    9 inches = 3/4 feet diameter, so 3/8 feet radius


    Volume = pi * r^2 * h


    V = pi * (3/8 ft)^2 * 3 ft


    V = pi * 9/64 square feet * 3 ft


    V = 27/64 * pi cubic feet


    V = approx. 5.3 cubic feet.





    55 pounds/cubic foot implies approx. 71.5





    The closest of your possible answers is 73 pounds.
    Weight = Volume * Density





    where





    Volume = (pi/4)(9/12)^2(3) = 1.325 ft^3





    Density = 55 lbs/ft^3





    and substituting values,





    Weight = (1.325)(55) = 73 lbs. --- this is the fourth option in your choices.
    http://en.wikipedia.org/wiki/Cylinder_(g鈥?/a>






    EDIT: I calculated with diameter instead of radius. I'm an idiot.
    pi(.375)^2*3=1.325


    1.325*55=72.89





    So 73 pounds

    What oil weight is best for cold winter driving?

    The ';W'; in and oils rating, such as 10W-30 means the oil meets specifications for viscosity at 0掳 F and is suitable for winter use. The only stuff you would have to change is if you've been running SAE30 you will need to switch to either 5W30 or 10W30 I would opt for 10W30 myselfWhat oil weight is best for cold winter driving?
    5w30 would be better,because its lighter and it will get to all internal parts faster.What oil weight is best for cold winter driving?
    I see some new cars recommend using 5W20, it's best to stick with their recommended oil weight. For most temperate weather most cars, 10W30 pr 10-W40 is good. In colder weather, 5W20 or 5W30 is better for cold starts, since it's thinner at start up it's easier for it to warm up.
    85-90.
    Whatever is recommended for your vehicle. The winter weight doesn't change with oil even in summer. So if your car takes 5w/30 then use that. It's rated for all year long.
    depending on year and make of car. Either 5w30 or if dodge honda or ford newer model 5w20.
    5w30, but just stick to the manufacturer recommended, or some synthetic works better if your willing to pay more.
    I asked my husband who is a Ase certified mechanic and he said it depends on the motor if u will Im me ill be glad to help
    Go by what the manufacturer recommends. It should say on the oil filler cap. The recommended viscosity, is what you should stick with............ the engine specks, oil, and the bearing clearances of the motor, are all figured by the car manufacturers engineers.

    Saturday, December 26, 2009

    What oil weight / viscosity does a CB919 ( 900 Hornet ) call for? 2000 CB919F?

    Just wondering if anyone has a clue what the 2000 CB919F calls for as far as oil viscosity. My RC51 uses 10-40, but that's a V-twin. Could be the same, but maybe different?





    Anyone know for a fact?What oil weight / viscosity does a CB919 ( 900 Hornet ) call for? 2000 CB919F?
    yeah, same thing. If you are in the summer you can use 20/50 on both.


    The colder the weather, the thinner the oil and viceversa.


    Don't over top it with oil.

    What weight motor oil should be used for my vintage car?

    I have a 1984 Chry town %26amp; country, Labaron 2.6, the milage is 140,900 I usually change my oil every 1,000-1,400 miles. Since its almost 17 years old what weight would help keep it alive at this age? This car is well taken care of and almost every part has been replaced except for the engine and tranny..Thank youWhat weight motor oil should be used for my vintage car?
    Actually your car is over 20yrs old, but thats not a bad thing. Most manufacterers will put a recommendation on the oil cap and when they don't its usually good to go with 30weight. 5W30 or 10W30, also with the miles that you do have I would also recommend that you use a high mileage oil because of the extra additives they put in to help the seals,bearings, and gaskets in your engine.





    If you take good care of your car then it will last a long time. Also, I wouldn't recommend changing your oil so much, every 2500-3000 miles is just right.





    Good luck and hope this helps.What weight motor oil should be used for my vintage car?
    I have a couple older cars %26amp; I use 10w40 in them.
    castrol high milage 20/50is the best for that car
    I would say 10w30
    It depends on the climate where you are. If it's a really cold climate, I'd go with 10w30, if it's a warm climate, I'd go with a 20w40.
    Any quality brand of 10w30 would be fine. If your using conventional motor oil it would be OK to only change it every 3000 miles. Quaker State offers a special blend oil for engines with high mileage. If cost is not a factor synthetic motor oil would be an option. Synthetic oil offers superior lubrication with less break down so it can be run longer between changes and promote extended engine life.
    10w40 oil used to be the ';standard'; for multi-grade oils when that vehicle was built but it does not hold additives as well as 10w-30.





    For most parts of the country where winter is not close to zero degrees, 10w-30 would be fine for an all around, all-season oil.





    The ';10'; refers to the viscosity at zero degrees F, and the 30 refers to the viscosity at 105 deg F. The viscosity will vary depending on the climate temperature. That's all those numbers mean. Make sure you use a good quality oil - any name brand or oil company oil (for example: Chevron).





    The newer oils ';designed for older cars'; simply added a seal expander to help slow down oil leaks.





    1000 to 1400 miles sounds a little premature, unless the time exceeds 6 months. A good interval would be 3 months or 3,000 miles; which ever comes first.

    What weight motor oil for 1999 Mercedes C230 Kompressor?

    What weight motor oil for 1999 Mercedes C230 Kompressor? Vehicle stays in the climates of AZ and California.What weight motor oil for 1999 Mercedes C230 Kompressor?
    Many Turbo Diesels are operating on the long haul and high load driving situations. The recommended oil designed for such service is described in API Service SJ/CF. Specifically, the Synthetic Oils (like MOBIL 1) with a 5W-30 viscosity rating meet the ACEA A3/B3 requirements for gasoline and diesel passenger car turbo protection.What weight motor oil for 1999 Mercedes C230 Kompressor?
    Factoring in the hot climate and the addition of forced induction, go with a slightly heavier weight. 10W-30, or 10W-40 at most would make the car happy under normal operating conditions.





    On cold mornings, let the car warm up and circulate the thicker oil for three to five minutes before hooning it. Not really critical, but helps a little for engine longevity.
    Stay with one of the recommended oils by Benz. Your vehicle falls under MB lubrication specification 229.5. There are several oils which are approved (the dealer closest to me uses Mobil 1 0W40 European Formulation).
    the recommended is mobil1 5/40